FlexLED – Emergency battery pack
The FlexLED can continue to be operated with reduced brightness for up to a maximum of 2 hours with the emergency battery pack in the event of a power failure. The battery charge level can be displayed by actuating the light. It has an internally built-in battery charge protection with protection against overcharging and overdischarging. The emergency battery pack is supplied with an plug and connector.
Brightness in emergency mode 2-sided LED light strip:
10 m: 30%
25 m: 20 %
50 m: 10 %
75 m: 7 %
100 m: 5 %
Battery status query
With the emergency function switched on, briefly press the illuminated pushbutton to indicate the power supply.
Number of red light flashes (flashing):
1× = 0 % – 20 % remaining power
2× = 20 % – 40 % remaining power
3× = 40 % – 60 % remaining power
4× = 60 % – 80 % remaining power
5× = >80 % remaining power
|
|
| Technical Data: |
|
| Power: |
50 W |
Emergency operation
rechargeable battery: |
120 min |
| Battery level: |
Display via indicator light |
| Connected power: |
max. 1.500 W |
| Input voltage: |
100-277VAC |
| Battery: |
6.000 mAh Li-Ion Accu |
| Charging time: |
> 24 h |
| Emergency trigger time: |
< 1 s |
| Type of protection: |
IP65 |
| Impact resistance: |
IK08 |
| Temperature range for operation: |
–10°C to +45°C |
| Connection cables: |
1,5 m (3×1,5 mm2 rubber cable
with IP44 schuko connectors) |
Strictly observe the operating instructions included with the products!